Purpose of this manual

Before operating the product for the first time or if you are assigned to other work on the product, you must read the operating instructions. The use and handling of the product described below and its operation may not be self-evident and is explained in detail in the accompanying technical documentation. The operating instructions will help you to use the product as intended, correctly, effectively and safely. Please read the following chapters carefully and thoroughly. If necessary, always look up facts that are decisive for you. The operating instructions inform and warn you of residual risks against which risk reduction by design and protective measures is not or not fully effective.



The digital structure of this manual enables permanent adaptation. If a specific topic is not, or not sufficiently, covered, please do not hesitate to contact us. We will be happy to supplement the document accordingly.


Please note that this manual is based on machine translation. The manual is constantly being improved and updated. If you are unsure about how to use the product or if you do not understand a passage correctly, please do not hesitate to contact us. We will improve the relevant sections and support you in using the product.


If you wish to print or save this manual in its entirety, you can download the current version here:  https://support.werocktools.com/a100/Scoria_A10X_Manual.pdf

Please note that interactive elements that this manual may contain are not available in this version.

Target groups of the operating manual

Zielgruppe 

Aufgaben 

Betreiber 

Diese Anleitung und mitgeltende Dokumente am Einsatzort der Anlage verfügbar halten, auch für spätere Verwendung. 

Mitarbeiter zum Lesen und Beachten dieser Anleitung und der mitgeltenden Dokumente anhalten, insbesondere der Sicherheits- und Warnhinweise. 

Zusätzliche Anlagenbezogene Bestimmungen und Vorschriften beachten. 

Fachpersonal 

Diese Anleitung und mitgeltende Dokumente lesen, beachten und befolgen, insbesondere die Sicherheits- und Warnhinweise. 


Personalqualifikation

Unter Fachpersonal wird eine Person verstanden, die eine Berufsausbildung erfolgreich absolviert hat. Sie muss übertragene Arbeiten beurteilen und aufgrund ihrer fachlichen Ausbildung und Arbeitserfahrung mögliche Gefahren selbstständig erkennen und vermeiden können.



Orientation in the operating instructions

Display of general information symbols


This operating manual contains the following general information symbols which guide you as a reader through the operating manual and provide you with important information.


Pictogram

Meaning

Important information 

This pictogram indicates important additional information that contains a warning of a danger.


Presentation of warnings


Security level (signal word)

Significance and consequences of non-compliance

Warning notice

DANGER

Imminent danger which leads to serious physical injury or death.

WARNING

Potentially dangerous situation that could lead to serious injury or death.

CAUTION

Potentially dangerous situation, which could lead to 

light physical injury.


HINT

situation that could lead to possible material damage to the product.




Signal word Danger


DANGER 

 

Nature and source of the risk 

Explanation of the nature and source of the risk 


  • Measures to avert the risk



Signal word Warning


WARNING 

 

Nature and source of the risk 

Explanation of the nature and source of the risk 


  • Measures to avert the risk


Signal word Caution


VORSICHT 

 

Nature and source of the risk 

Explanation of the nature and source of the risk 


  • Measures to avert the risk


Signal word Hint


HINWEIS 

 

Note on a possible harmful situation 


Explanation of the potentially harmful situation and how it can be avoided.


Possible symbols in the operating instructions


The possible symbols in the operating instructions are divided into the categories warning, command and prohibition symbols. Warning symbols warn of danger points, risks and obstacles. Mandatory symbols serve to prevent accidents at the workplace. Prohibition symbols contribute to more safety.


General commandment symbol

General warning symbol

General prohibition symbol



Warning symbols in the operating instructions


Warning of suspended load

Warning of hot surface

Warning of danger of crushing

Wear protective goggles

Wear safety shoes

Wear protective gloves


Prohibition symbols in the operating instructions


Do not enter the area

Access for unauthorised prohibitions

Ban on persons with pacemakers


Representation of illustrations


Illustrations are provided with a caption. If reference lines are present in the figure, these references are explained in a legend in tabular form below the figure. Position numbers or letters are used for the references.  


Sensor  

3

Micro USB Connector

Start/Stop Button

4

Battery status LEDs


Presentation of requirements


Sind für das Ausführen einer Tätigkeit an der Maschine bestimmte Voraussetzungen zwingend, werden diese im Text mit einer Checkbox gekennzeichnet und im Fettdruck dargestellt. 


Beispiel für die Darstellung von Voraussetzungen:


[  ] The coffee machine is set up and connected 

[  ] The coffee machine is switched off 



Presentation of action steps


In fixed sequence


Instructions for action in a fixed order are numbered consecutively. The sequence of the work steps must be strictly observed.  

Example of an instruction for action with fixed sequence: 


  1. Remove the water tank (A) from the coffee machine. 
  2. Fill the water tank with water.  
  3. Put the water tank back into the machine.


In no fixed sequence


Instructions for action in no particular order are marked with the bullet point. 


Example of an instruction for action without fixed order: 


  • Clean the outside of the unit with a soft, damp cloth and a commercially available dishwashing detergent. 
  • Rinse the drip tray and the coffee pad container with a soft, damp cloth and a commercially available dishwashing detergent.


Presentation of results


For many activities it is necessary to carry out the work steps with intermediate results and final results. 

Intermediate results represent procedures that are not carried out by the user and are marked with an arrow ->. 

Final results indicate the end of the action and are marked with a double arrow =>. 

Example of an action instruction with results: 



  1. Switch the coffee machine on at the main switch (1).

-> The coffee machine warms up as long as the main switch is flashing. If the 

main switch permanently, the coffee machine is ready for use. 

  1. Place a container under the spout.

  2. Press the main switch (1) again. 


=> The coffee is prepared. The coffee dispensing function ends automatically.  


Further notes


WEROCK Technologies GmbH is also abbreviated as "WEROCK" in these operating instructions. 


These operating instructions are only available in digital form for reasons of operability and environmental protection. Should you require a printed manual, you are welcome to request it from us in the desired quantity free of charge. Please note that printed instructions do not include a search function and do not offer any interactive functions. At the same time there is no automatic update and extension of the manual. 




Identification of the product

Manufacturer information


WEROCK Technologies GmbH

Kallhardtstr. 20

75173 Pforzheim

Deutschland


Tel.: +49-7231-4709405-10

Mail: [email protected]

www.werocktools.com


Nameplate




General information on the declaration of conformity



We herewith declare that the WorkTab series devices comply with the essential requirements of the European Directive 1999/5/EC. The complete EC Declaration of Conformity can be downloaded from www.werocktools.com


RoHS Declaration of Conformity

We hereby declare that our products comply with the RoHS Directive 2011/65/EU of the European Parliament and of the Council of 08/06/2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

The following substances in particular are concerned:


- lead (Pb)

- Cadmium (Cd)

- Hexavalent chrome (Cr)

- Polybrominated biphenyls (PBB)

- Polybrominated diphenyl ethers (pentaBDE, octaBDE; decaBDE)

- Mercury (Hg)


WEROCK Technologies GmbH hereby declares that all our products are manufactured RoHS compliant.


REACH Declaration of Conformity

WEROCK Technologies GmbH is a manufacturer of electronic hardware. We are therefore considered a "downstream user" as far as the REACH document is concerned. WEROCK Technologies GmbH is therefore not obliged to register with the European Chemicals Agency "ECHA".


The products sold by WEROCK Technologies GmbH are "articles" within the meaning of REACH (Article 3 Definitions). Furthermore, the delivered products must not release any substances under normal and reasonably foreseeable circumstances of use. WEROCK Technologies GmbH is not obliged to register or to prepare safety data sheets for this purpose.


In order to guarantee our customers a continuous supply of reliable and safe products, we ensure that our suppliers meet all requirements regarding chemical substances and processed materials.