1. Connect the camera to a computer via USB or docking station


  1. Open the Impakt Tools Camera Tool on your computer, enter the password and click on "Connect Device". Then click on "Unlock Memory Card". The Body Cam will now appear as a mass storage device on your computer.

    -> ->  


  1. Copy the firmware file into the root directory of the Bodycam


  1. Disconnect the USB connection or remove the camera from the docking station. The camera turns off. Press and hold the Capture button to turn the camera on. The LED ring starts blinking. After completion the Bodycam will switch itself off or restart automatically. Please do not press any buttons as long as the LED is blinking and the upgrade process is active, this could make the device unusable.