This product does not belong in the household waste, but must be disposed of through the official disposal points. 


If the product contains an integrated battery, it must be removed from the device before disposal. The battery must be disposed of in a separate battery recycling facility. The remaining product must be disposed of with the electronic waste.


Instead of disposing of the product, you can also send it to us free of charge for recycling and refurbishment. WEROCK does not care if the device is still functional.  This is not only good for the environment, but also helps us to improve our products even further.


We participate in the system "Stiftung elektronik-altgeräte-register" under the registration number DE95468698. Our battery registration number is 21010619.




Disposal sites

Please contact your local waste disposal company for professional disposal. If necessary, ask your local town hall. 


An overview of take-back points from the take-e-back system can be found here: https://www.take-e-back.de/Verbraucher-Ruecknahmestellen-finden 


Appliance batteries and rechargeable batteries can be returned free of charge wherever they are sold - regardless of where they were purchased and regardless of brand and type. Even if you deliver the energy sources to the collection points of the municipalities (e.g. recycling yards) or to mobile pollutant collection points, you will of course not incur any costs. According to § 11 BattG, owners of used batteries must collect them separately from unsorted municipal waste. Used portable batteries are collected exclusively at collection points that are connected to the common take-back system or a manufacturer's own take-back system.


There are currently over 200,000 collection points in Germany. You are also welcome to return batteries to WEROCK Technologies. However, in the interest of sustainability we recommend the nearest collection point.


Further information is available at http://www.grs-batterien.de/start.html as well as from the GRS hotline on 01806 - 80 50 30 (20 cents/call from the German fixed network of Deutsche Telekom AG, prices may vary from mobile phone networks and from abroad).




Information according to § 4 paragraph 4 Elektrogesetz for Rocktab U210


The following batteries or accumulators are contained in this electrical appliance:


Battery type

Chemical system

Built-in battery (backup battery)

Lithium-Ion

Removeable battery

Lithium-Ion




Information on the safe removal of batteries or accumulators



  1. Make sure that the battery is fully discharged. 
  2. Unlock the two battery locking tabs (number 4 in the operating and display elements diagram) marked as 1. When these are unlocked, you will see a red mark.
  3. Unlock the battery cover tab marked 2. When these are unlocked, you will see a red mark.
  4. Now slide the battery cover in the direction of the battery locking tabs. Above the cover (number 5 in the operating and display elements diagram) you will find an indicator showing the position of the cover.
  5. Now you can remove the lid.
  6. Slide the battery towards the battery locking tabs.
  7. Pull out the battery using the tab attached to the battery.
  8. Loosen all screws on the cover of the backup battery; remove the cover.
  9. Carefully remove the backup battery and disconnect the cable from the main circuit board.
  10. The battery or accumulator and the device can now be disposed separately.


Information according to § 4 paragraph 4 Elektrogesetz for Rocktab U210 Pro


The following batteries or accumulators are contained in this electrical appliance:


Battery type

Chemical system

Built-in battery (backup battery)

Lithium-Ion

Removeable battery

Lithium-Ion




Information on the safe removal of batteries or accumulators



  1. Make sure that the battery is fully discharged. 


  1. Unlock the battery lock (number 2 in the operating and display elements diagram). To do this, press the button in the centre of the lock and slide the lock in the direction of the symbol with the open lock. 
     


  1. You can now remove the battery. To do this, lift it by the tab and remove it.


  1. Loosen all screws on the cover of the backup battery; remove the cover.


  1. Carefully remove the backup battery and disconnect the cable from the main circuit board.


  1. The battery or accumulator and the device can now be disposed separately.