To charge an optional replacement battery for the Rockscan W100 scanner, proceed as follows:


  1. Remove the primary battery from the device.
  2. Insert the optional battery into the device. 
  3. Connect the cable included in the scope of delivery to the scanner
  4. Connect the cable to a suitable power supply unit or computer connection with USB type A socket (5 volt voltage, USB 2.0 standard is sufficient)
  5. If the connection is successful, the LED lights up red and the battery charges.
    When the battery is fully charged, the red LED goes out.


Alternatively, the spare battery can also be charged separately using the optional charging stations.