1

Battery charging slot

Charges a spare battery in parallel with the barcode scanner

5

Bluetooth MAC address of the Bluetooth adapter (BFP1 only)

Switch the device to Bluetooth SPP mode, scan the Bluetooth MAC address barcode (either 1D or 2D), and the device and adapter will activate pairing mode.

2

Status display of the battery charging slot

After the base station has been switched on, insert the battery into the battery charging slot. The red light on the status display of the battery charging slot lights up. When the battery is fully charged, the red indicator will no longer light up.

6

Bluetooth status display (BFP1 only)

If the base station can be used as a Bluetooth adapter, the Bluetooth status indicator flashes blue (pairing mode) when there is no Bluetooth connection; if the Bluetooth connection is successful, the blue indicator is always lit.

3

Device charging slot status indicator

The device charging slot status indicator lights up red. When the battery is fully charged, the red light goes out.

7

Data transmission indicator (BFP1 only)

If the base station can be used as a Bluetooth adapter and the data transfer is successful, the data transfer indicator lights up once.

4

Device charging slot

To charge the scanner, insert it with the charging ports facing downwards.