Basic Safety Instructions
Duty of care of the operator
Please read these safety instructions carefully. Please read this manual before using the product. The operation of the products depends on your reading and following the information in this manual. Check your work before you start using the product.
Keep this manual for future reference, it is part of the product. Observe all warnings and notes on the product. If a serious problem occurs while using this product, stop using it immediately.
General operating safety
General instructions for energy-efficient use of the product Save energy by following these points:
|
Basic guidelines and protective measures
HINT |
|
|
Permanent solar radiation Permanent exposure of the display to sunlight can cause overheating and impair the functioning of the product. Please observe the operating temperature in the technical data. |
HINT |
|
|
Explosive or burning environment You should avoid placing the product near an explosive or burning environment. If the product is placed too close to an explosive or burning environment, the product may overheat and malfunction. |
HINT |
|
|
Installation on the floor Avoid placing the product on the floor. Other people or yourself could trip over it. |
CAUTION |
|
|
Risk of injury during overhead installation If the product is mounted above a work area where people are working, the bracket may fail.
|
CAUTION |
|
|
Danger of short circuit due to defective cables Defective cables can lead to short circuits and fires.
|
WARNING |
|
|
Danger to life due to damaged battery If the housing should "inflate" the battery is defective. The battery could start to burn or explode.
|
Product specific risks
HINT |
|
|
Damage to the touch screen by sharp objects The product's touch screen can be damaged by the use of sharp objects (e.g. screwdrivers, knives, scissors or other tools). The touch screen of the product is only suitable for operation with fingers or special operating aids. |
CAUTION |
|
|
Risk of injury from glass and metal splinters Bending or twisting could break the glass of the display, circuit board or mechanics. If the glass is broken, do not attempt to touch or remove any glass parts of the product.
|