Two different modes of live streaming are possible with the Bodycam, in client mode and in standalone mode. The transmission in WLAN mode is only with image and without sound. The Bodycam is delivered in standalone mode.

WLAN-Streaming im Client-Modus

  1. First, make sure that you have made the correct settings in the "WLAN configuration in client mode" section and determine the assigned IP.
  2. If you have not already done so, open the "Camera Tool", connect to the bodycam and set the "Wifi Function" parameter to "on" and confirm by clicking on "Apply".
  3. Restart the camera, as soon as the Bodycam has connected to the WLAN network you will hear an additional sound. You can now access the bodycam with the assigned IP address under rtsp://IP address.

To play the stream we recommend the VLC Media Player, which is not included. The program is open-source and available for free. However, you can also use any other software of your choice that can handle RTSP streams.

WLAN streaming in standalone mode

  1. Open the "Camera Tool", connect to the bodycam and set the "Wifi Function" parameter to "on". Confirm this by clicking on "Apply".
  2. Enter a WLAN password and click on "Apply" to confirm. The password must have 8 characters and must not contain any special characters.
  3. Disconnect the camera and restart it. The camera now works as a WLAN access point. You can now connect to the camera e.g. with your smartphone. A suitable app is e.g. "Roadcam" which is available in the Play Store.







 Hint


Pre-recording does not work when WLAN live streaming is switched on. Do not use both functions together, as this could lead to undesired malfunctions. Only the image is transmitted in the WLAN livestream and no sound.